Module:Color contrast

From annadreambrush.com/wiki
Revision as of 19:22, 25 July 2015 by imported>Mr. Stradivarius (split the color data out to Module:Color contrast/colors and load it with mw.loadData - this way we only create the table once per page rather than every time color2lum is called)
Jump to navigation Jump to search

Documentation for this module may be created at Module:Color contrast/doc

--
-- This module implements 
--  {{Color contrast ratio}}
--  {{Greater color contrast ratio}}
--  {{ColorToLum}}
--  {{RGBColorToLum}}
--
local p = {}
local HTMLcolor = mw.loadData( 'Module:Color contrast/colors' )

local function sRGB ( v ) 
	if (v <= 0.03928) then 
		v = v / 12.92
	else
		v = math.pow((v+0.055)/1.055, 2.4)
	end
	return v
end

local function color2lum( c )

	if (c == nil) then
		return ''
	end
	-- whitespace
	c = c:match( '^%s*(.-)%s*$' )

	-- lowercase
	c = c:lower()

	-- first try to look it up
	local L = HTMLcolor[c]
	if (L ~= nil) then
		return L
	end
	-- remove leading # (if there is one) and whitespace
	c = mw.ustring.match(c, '^[%s#]*([a-f0-9]*)[%s]*$')

	-- split into rgb
	local cs = mw.text.split(c or '', '')
	if( #cs == 6 ) then
		local R = sRGB( (16*tonumber('0x' .. cs[1]) + tonumber('0x' .. cs[2]))/255 )
		local G = sRGB( (16*tonumber('0x' .. cs[3]) + tonumber('0x' .. cs[4]))/255 )
		local B = sRGB( (16*tonumber('0x' .. cs[5]) + tonumber('0x' .. cs[6]))/255 )

		L = 0.2126 * R + 0.7152 * G + 0.0722 * B
		return L
	elseif ( #cs == 3 ) then
		local R = sRGB( (16*tonumber('0x' .. cs[1]) + tonumber('0x' .. cs[1]))/255 )
		local G = sRGB( (16*tonumber('0x' .. cs[2]) + tonumber('0x' .. cs[2]))/255 )
		local B = sRGB( (16*tonumber('0x' .. cs[3]) + tonumber('0x' .. cs[3]))/255 )

		L = 0.2126 * R + 0.7152 * G + 0.0722 * B
		return L
	end

	-- failure, return blank
	return ''
end

function p._greatercontrast(args)
	local bias = tonumber(args['bias'] or '0') or 0
	local v1 = color2lum(args[1] or '')
	local c2 = args[2] or '#FFFFFF'
	local v2 = color2lum(c2)
	local c3 = args[3] or '#000000'
	local v3 = color2lum(c3)
	local ratio1 = 0;
	local ratio2 = 0;
	if (type(v1) == 'number' and type(v2) == 'number') then
		ratio1 = (v2 + 0.05)/(v1 + 0.05)
		ratio1 = (ratio1 < 1) and 1/ratio1 or ratio1
	end
	if (type(v1) == 'number' and type(v3) == 'number') then
		ratio2 = (v3 + 0.05)/(v1 + 0.05)
		ratio2 = (ratio2 < 1) and 1/ratio2 or ratio2
	end
	return (ratio1 + bias > ratio2) and c2 or c3
end

function p._ratio(args)
	local v1 = color2lum(args[1])
	local v2 = color2lum(args[2])
	if (type(v1) == 'number' and type(v2) == 'number') then
		-- v1 should be the brighter of the two.
		if v2 > v1 then
			v1, v2 = v2, v1
		end
		return (v1 + 0.05)/(v2 + 0.05)
	else
		return args['error'] or '?'
	end
end

function p.lum(frame)
	return color2lum(frame.args[1] or frame:getParent().args[1])
end

function p.ratio(frame)
	local args = frame.args[1] and frame.args or frame:getParent().args
	return p._ratio(args)
end

function p.greatercontrast(frame)
	local args = frame.args[1] and frame.args or frame:getParent().args
	return p._greatercontrast(args)
end

return p